Ninetology Black Pearl 2 Jelly Bean ROM (4.1.1) (Wiko Cink Slim)



To install this ROM, please provide the following files :

  • Ninetology Black Pearl 2 driver 
        Link : download driver
  • SP Flashtools 
        Link : download SpFlashtools JB
  • Firmware ROM Black Pearl 2 (JELLY BEAN)
        Link : ROM JELLY BEAN (WIKO CINK SLIM)

  • step by step


  • Extract BP2 driver, SP flashtool on your PC, and install BP2 driver
  • Eject your BP2 from PC,
  • Now, open SP flashtool (remember, don’t connect your BP2 to PC)
  • On SP flashtool, click on “Scatter Loading” and find for “MT6577_Android_scatter_emmc.txt” on extracted BP2 v17 firmware as your download before.
  • Remove the battery from your BP2, connect USB to BP2 (make sure you do not connect it to a PC)
  • On SP flashtool, click on DOWNLOAD.
  • After that, connect the USB to the PC, and as soon as possible, replace the battery to your BP2.
  • Let PC detect your BP2, and wait until the SP flashtool install the firmware into your BP2.
  • Its approximately at 5-6 minutes to complete.
  • At the beginning of the flash, that bar is red, then purple, and yellow


  • Wait until the DOWNLOAD is complete, when finished click Close. Remove the USB from the PC



    A special thanks to Lepakspot.com & Ninetology User Malaysia on facebook!
    Previous Post Next Post